Mazda model
Mazda RX-7 for sale
RX-7 listings span FB3S (SA22C, 1978-1985), FC3S (1985-1991), and FD3S (1991-2002). Three generations of rotary-engined rear-wheel-drive coupe. The FB3S runs the naturally-aspirated 12A twin-rotor; the FC3S runs the 13B Turbo II single-turbo; the FD3S carries the 13B-REW sequential twin-turbo. FD3S JDM variants include Type R, Type RS, RZ, and the limited Spirit R Type A (2002). All three generations are now subject to NHTSA's manufacture-date 25-year provision: FB3S from 2003, FC3S from 2010, and FD3S from 2016 onward.
Read more
Mazda RX-7 — pricing right now
- Listings
- 270
- From
- $3,595CA$5,041£2,688A$5,049€3,134¥565,686
- Up to
- $82,140CA$115,184£61,420A$115,352€71,606¥12,925,024
- Average
- $32,273CA$45,256£24,132A$45,322€28,134¥5,078,272
Source: JDMBUYSELL marketplace data. Prices and availability can change.
Previously listed
No Mazda RX-7 currently listed
These Mazda RX-7 listings are no longer available. Shown for reference only.
-
1992 Mazda RX-7
FL, USA$35,995CA$50,475£26,915A$50,549€31,379¥5,663,942JDM SuperMotors Inc
Replies in ~15h
-
2002 Mazda RX-7
JapanPrice on requestJDM Expo Co. Ltd.
-
1998 Mazda RX-7
Japan$37,659CA$52,809£28,159A$52,886€32,830¥6,000,000Japan Motor Co., Ltd.
-
2001 Mazda RX-7
Japan$45,241CA$63,441£33,829A$63,533€39,439¥7,208,000Japan Motor Co., Ltd.
-
1997 Mazda RX-7
Japan$21,340CA$29,925£15,957A$29,968€18,603¥3,400,000Japan Motor Co., Ltd.
-
2001 Mazda RX-7
Japan$46,446CA$65,131£34,730A$65,226€40,490¥7,400,000Japan Motor Co., Ltd.
-
1989 Mazda RX-7
Japan$15,943CA$22,357£11,921A$22,389€13,898¥2,540,000Japan Motor Co., Ltd.
-
2001 Mazda RX-7
Japan$28,558CA$40,047£21,354A$40,105€24,896¥4,550,000Japan Motor Co., Ltd.
-
1999 Mazda RX-7
Japan$16,633CA$23,324£12,437A$23,358€14,500¥2,650,000Japan Motor Co., Ltd.
-
1997 Mazda RX-7
Japan$16,319CA$22,884£12,203A$22,917€14,226¥2,600,000Japan Motor Co., Ltd.
-
2000 Mazda RX-7
Japan$24,792CA$34,766£18,538A$34,816€21,613¥3,950,000Japan Motor Co., Ltd.
-
1998 Mazda RX-7
Japan$22,282CA$31,246£16,661A$31,291€19,425¥3,550,000Japan Motor Co., Ltd.
While you wait
Other Mazda models available now
-

1995 Mazda Scrum
MD, USA$7,700CA$10,798£5,758A$10,813€6,713¥1,211,623Tokyo Motors DC LLC
-

2010 Mazda Axela
Auckland, New Zealand$10,285CA$14,423£7,691A$14,444€8,966¥1,618,382Reliable Performance Motors
Replies in ~3d
-

2012 Mazda Atenza
Auckland, New Zealand$11,428CA$16,025£8,545A$16,049€9,962¥1,798,237Reliable Performance Motors
Replies in ~3d
-

2001 Mazda Roadster (Eunos Roadster / MX-5)
Japan$7,087CA$9,938£5,299A$9,953€6,178¥1,115,165TCV (tradecarview)
History & specs
About the Mazda RX-7
The RX-7 was produced across three generations from 1978 to 2002, all using the Wankel rotary engine in configurations from naturally-aspirated through sequential twin-turbo. The FB3S (SA22C, 1978-1985) used the 12A twin-rotor naturally-aspirated; the FC3S (1985-1991) the 13B in single-turbo Turbo II or naturally-aspirated form; the FD3S (1991-2002) the 13B-REW sequential twin-turbo. Each generation increased power and mechanical sophistication while retaining the front-mid-engine, rear-wheel-drive balance.
The FD3S is the generation with the strongest collector profile. JDM trims include Type R (sport suspension), Type RS (Bilstein front dampers, optional six-speed manual), and RZ (convertible basis, lower production). The Spirit R, produced in 2002 as the final FD3S, is available in Type A (two-door coupe, six-speed manual, Brembo brakes, racing seats), Type B, and Type C (automatic). Spirit R Type A was a limited-production final-edition model. FD3S peak JDM output is 255ps in standard documentation.
All three generations are subject to NHTSA's manufacture-date 25-year provision: FB3S from 2003, FC3S from 2010, and FD3S progressively from 2016 onward (2002 Spirit R clears by 2027). Right-hand drive. Rotary engine pre-purchase evaluation requires differential pressure testing; standard cylinder-bore compression gauges do not function correctly on Wankel engines. Apex seal condition, oil injection system function, and coolant header tank condition are the primary inspection points on FD3S imports. Rebuild intervals are measured in apex seal wear rather than simple mileage.
FAQ










