Buyer's guide

15 min read

Honda Prelude BB6

Buyer's guide & specs

Production
1997-2001
Engine
H22A4
2.2L

Quick answer

The Honda Prelude is a classic Honda coupe prized for sharp handling, high-rev engines, and strong enthusiast support. Values are rising fastest for clean 5th-gens and rare trims, while driver-grade cars remain attainable. Buy on rust, maintenance history, and trim correctness.

Background

Overview

The fifth-generation Prelude (chassis BB6, 1996-2001) is the most desirable generation in today's market. The H22A 2.2L DOHC VTEC engine appeared in JDM SiR and SiR-S form (the 'red-top,' factory-rated 220 PS at 7200 rpm) and in U.S. H22A4 form (195 hp at 7000 rpm). The JDM SiR-S and U.S. Type SH both received Active Torque Transfer System (ATTS), a hydraulically actuated torque-vectoring front differential that biased drive torque to the outside wheel through a corner.

The JDM Type S — sold only in the Japanese market and only in small numbers — adds Alcantara interior, embroidered seat lettering, active ABS, and other JDM-only trim cues. The 4-speed Sport Shift automatic transmission introduced on this generation has the worst reliability reputation of any Prelude trans; failures often appear between 70,000 and 100,000 miles, and most owners convert to manual rather than repair. Type SH and SiR-S cars with documented ATTS function are the auction-grade trim; rebuilt or non-functioning ATTS adds several thousand dollars of cost. Honda discontinued the Prelude in August 2001. The fourth-generation Prelude, introduced in 1991, could be specified with electronically controlled Hyper 4WS and adopted twin-reflector headlights.

Identification

Chassis-code reference

Generation names are broad families. The factory chassis codes below identify the variants represented in JDMBUYSELL's current Honda Prelude guide data.

BB6
Chassis codes: BB6, BB7, and BB9

Confirm the complete code on the vehicle's frame or VIN plate; drivetrain, body, and market variants can use different prefixes within one generation family.

Chassis Code Explained

B Series prefix
B Model
6 Variant code
Segment Meaning Detail
B Series prefix B-series (Honda mid-range coupe platform)
B Model Prelude fifth-generation body series
6 Variant code BB6 — H22A VTEC SiR specification

The BB6 is the H22A VTEC SiR variant of the fifth-generation (BB5–BB9) Prelude. The fourth generation used the BA8, BA9, BB4, and BB1 codes.

Key Takeaways

  • 5th-gen (1997-2001) leads demand; clean manuals bring premiums
  • Rust + accident repairs matter more than miles on most cars
  • H22/H23 timing belt history is a must; budget catch-up service
  • 4WS (3rd/4th-gen) adds appeal but increases parts complexity
  • SH/ATTS is collectible; verify function and correct parts
  • Autos trade cheaper; manuals are the liquidity sweet spot
From JDMBUYSELL

Find a Honda Prelude for sale

Browse listings

Technical Specifications

Engine Options

Chassis Engine Displacement Power — JDM Notes
BB5/BB6/BB7/BB8 (5th gen) H22A4 2.2L 195hp @ 7000rpm (estimated) USDM; Type SH uses same longblock
BB5/BB6/BB7/BB8 (5th gen) H22A5 2.2L 185hp @ 6500rpm (estimated) Europe; emissions tune differs
BB5/BB6/BB7/BB8 (5th gen) H22A 2.2L 200hp @ 7000rpm (estimated) JDM SiR; output varies by year

Transmission Options

Type Ratios Availability Notes
5-speed Manual 3.307/1.809/1.250/0.909/0.702 (estimated) Most trims, all gens (market-dependent) Ratios vary by engine/market/year
4-speed Automatic 2.714/1.500/1.000/0.705 (estimated) Most trims (market-dependent) Lock-up TC on later units
Tiptronic-style 4AT (SportShift) 2.714/1.500/1.000/0.705 (estimated) 5th gen (some markets) Manual mode; ATTS not on 4AT SH

Livability

Headroom
37.0"
With sunroof, tall drivers may brush headliner
Rear Seats
Tight 2+2
Adults fit short trips; legroom limited
Cargo
12.0 cu ft
Good trunk; rear seat pass-through varies by gen

Variants & Trims

Generation Trim Engine Key Features
5th gen (BB5/BB6/BB7/BB8, 1997-2001) Prelude (base) H22A4 2.2L DOHC VTEC I4 ATTS optional, 4-wheel discs, revised chassis
5th gen (BB5/BB6/BB7/BB8, 1997-2001) Prelude Type SH (US) H22A4 2.2L DOHC VTEC I4 ATTS, stiffer suspension, unique wheels
5th gen (BB5/BB6/BB7/BB8, 1997-2001) Prelude SiR (JDM) H22A 2.2L DOHC VTEC I4 High-output H22A, sport trim, 5MT/4AT
5th gen (BB5/BB6/BB7/BB8, 1997-2001) Prelude SiR S-spec (JDM) H22A 2.2L DOHC VTEC I4 Recaro seats, Momo wheel, aero/trim upgrades
5th gen (BB5/BB6/BB7/BB8, 1997-2001) Prelude Type S (Europe) H22A5 2.2L DOHC VTEC I4 High-output, sport suspension, 5MT
From JDMBUYSELL

How to import a JDM car — complete guide

Read the guide

Should You Buy a Honda Prelude BB6?

Why You'll Love It

  • Engaging chassis balance Low cowl, good steering, and predictable rotation; feels special vs many FWD coupes.
  • High-rev Honda engines H22/H23 deliver strong top-end and reliability when maintained; great NA tuning base.
  • Strong enthusiast support Active community, swap knowledge, and parts interchange with other Hondas ease ownership.
  • Type SH/ATTS character ATTS-equipped SH feels sharper on corner exit; a unique 90s Honda tech talking point.
  • Usable classic Comfortable seating, decent trunk, and daily-friendly manners compared with many 90s icons.
  • Value upside in top cars Clean, stock, manual examples—especially rare trims—have shown steady appreciation.

Why You Might Not

  • Rust and prior bodywork Quarter/rocker rust and collision repairs are common; straight, original panels cost more.
  • Timing belt service critical H-series belt/water pump intervals matter; unknown history can mean expensive catch-up.
  • Auto trans reputation Some 90s Honda autos are weaker; manuals are preferred for longevity and resale.
  • ATTS/4WS parts complexity SH ATTS and older 4WS systems add failure points; sourcing parts can be challenging.
  • Interior/trim scarcity OEM seats, dash pieces, and exterior moldings are harder to find; restoration adds cost.
  • Modified car risk Many were tuned; wiring, engine swaps, and cheap coilovers can hide expensive problems.

Who Should NOT Buy This

  • Anyone needing a reliable automatic daily driver
  • Buyers who can’t verify timing belt history
  • People who won’t check oil weekly
  • Drivers wanting modern crash safety and airbags
  • Rust-belt buyers without budget for metal repair
  • Type SH buyers unwilling to service ATTS properly
  • Anyone needing real rear-seat adult comfort
  • Owners without access to a Honda-savvy mechanic
  • People who hate chasing 25+ year old leaks
  • Emissions-strict areas if cat/EGR issues present
  • Buyers expecting cheap OEM interior/exterior parts
  • Those who plan heavy mods without proper tuning
  • People who can’t tolerate squeaks/rattles
  • Anyone who needs strong A/C with zero upkeep
  • Drivers who want low insurance theft risk
  • Buyers who can’t do preventative maintenance

Common Issues & Solutions

Issue Cause Solution Est. Cost
Auto trans failure (4th/5th gen) Heat, poor maintenance, worn clutch packs Rebuild/replace; add cooler; use Honda ATF $2500-4500
Manual 2nd gear grind Synchro wear from hard shifts/old MTF Rebuild trans; use Honda MTF; avoid power shifts $1800-3200
ATTS warning / no torque vector Low fluid, bad pressure switch, pump wear Service ATTS fluid; diag switches; rebuild unit $400-3500
ATTS binding in tight turns Wrong fluid or contaminated ATTS system Multiple ATTS flushes; inspect clutch packs $250-1200
Oil consumption Worn rings, valve seals, high-RPM use Leakdown test; rebuild top/bottom as needed $800-4500
VTEC solenoid gasket leak Aged gasket and screen clogging Replace gasket/screen; clean mating surface $80-250
Distributor failure (older gens) Internal bearing/igniter/coil heat failure Replace distributor or rebuild with OEM parts $250-650
Ignition switch wear High key weight; worn contacts Replace ignition switch; inspect cylinder $150-450
Idle surge / hunting IACV dirty, vacuum leaks, FITV issues Clean IACV; fix leaks; service FITV if equipped $80-400
EGR clog / EGR code Carboned EGR ports in intake manifold Clean EGR ports; replace EGR valve if needed $150-600
P0420 catalyst efficiency Aged cat, exhaust leaks, tired O2 sensors Fix leaks; replace O2; replace cat if needed $250-1800
Head gasket failure after overheat Neglected cooling system; warped head Pressure test; machine head; gasket set $1200-2800
Cracked radiator end tanks Aged plastic tanks; heat cycling Replace radiator and cap; bleed system $250-600
Heater core leak Corrosion; old coolant; electrolysis Replace heater core; flush system $700-1400
Power steering rack leak Worn seals; torn boots; contaminated fluid Replace/reseal rack; flush; new hoses as needed $900-1800
PS pump whine/leak Worn pump, bad o-rings, aerated fluid Replace pump seals/o-rings; flush; replace pump $120-650
Front compliance bushing tear Age, aggressive driving, lowered suspension Replace bushings/arms; align; avoid cheap parts $400-1200
Ball joint failure risk Boot tears; lack of grease; age Replace ball joints/control arms; align $350-900
Seized brake calipers Corrosion, torn boots, old brake fluid Rebuild/replace calipers; flush fluid $300-900
Warped rotors / brake shimmy Pad deposits, stuck caliper, cheap rotors Fix caliper; quality rotors/pads; bed properly $250-700
ABS light (sensor/wiring) Broken sensor wire, rusted tone ring, hub play Repair wiring; replace sensor/hub as needed $150-650
Wheel bearing noise Age, impacts, low-quality hubs Replace hub/bearing; torque axle nut correctly $250-650
CV axle vibration Worn inner joint; cheap reman axles Use quality axle; check mounts and alignment $250-700
Engine mount collapse Age, oil saturation, hard launches Replace mounts; avoid solid mounts for street $300-900
Sunroof leaks Clogged drains; hardened seals Clear drains; reseal; repair rusted channels $50-600
Trunk water intrusion Tail light seals, antenna grommet, seam sealer Reseal lamps/seams; treat rust in spare well $80-500
Rust at rockers/quarters Trapped debris, salted roads, poor repairs Cut/weld metal; proper rustproofing; repaint $800-5000
Window regulator failure Worn cables/sliders; dry tracks Replace regulator; lube tracks; check switches $200-500
Blower resistor failure Heat stress; clogged cabin intake Replace resistor; check blower motor draw $80-250
A/C weak or inop Leaks, bad compressor clutch, low charge Leak test; replace O-rings; compressor if needed $200-1400
Fuel pump failure Age, running low fuel, clogged sock/filter Replace pump/strainer; check relay and wiring $250-650
Main relay intermittent no-start Cracked solder joints from heat cycling Resolder or replace relay; confirm fuel prime $40-180
O2 sensor aging High miles; exhaust leaks; contamination Replace upstream/downstream sensors as needed $150-450
Timing belt overdue risk Neglect; unknown history; age cracking Do belt, tensioner, water pump, seals ASAP $700-1400

Pre-Purchase Inspection Checklist

Critical Priority

High Priority

Medium Priority

Low Priority

Generation History

3rd Gen Prelude (BA4/BA5) (1988-1991)

  • First **4WS** option; standout tech feature
  • 2.0 Si/Si 4WS; high-rev character
  • Values rising for clean 4WS and Si

5th Gen Prelude (BB6) (1997-2001)

  • **Type SH/ATTS** adds torque-vectoring feel
  • H22A4 (US) 2.2 VTEC; strong aftermarket
  • Most liquid market; manuals command premium
From JDMBUYSELL

Find a verified JDM dealer near you

View dealers

Sales Numbers by Year

Year Total Notes
1979 — U.S. launch at approximately $6,500 USD list price (1.8L SOHC, 5-speed manual or 2-speed Hondamatic).
1987 — Third-generation BA4 launched with optional mechanical 4WS — passenger-car world-first.
1988 — 4WS-equipped Prelude becomes first 4WS car sold in the United States.
1996 — Fifth-generation Prelude launched November 1996; H22A red-top in JDM SiR/SiR-S, H22A4 in U.S. Type SH.
2001 826,082 Production ended August 2001 after 23 years; cumulative production across all five generations reached approximately 826,082 units (source: WP body, Honda corporate communications).
2023 — Honda Prelude Concept revealed at Japan Mobility Show, October 2023; first preview of sixth-generation hybrid revival.

Market Data

Production Numbers & Rarity

Generation Years Total Built Notes
2nd gen (AB) 1983-1987 unknown (estimated ~500,000) High-volume; strong US sales era
3rd gen (BA4/BA5) 1988-1991 unknown (estimated ~350,000) 4WS-equipped subset relatively rare
5th gen (BB5/BB6/BB7/BB8) 1997-2001 unknown (estimated ~200,000) Lowest-volume generation; Type SH rarer

How It Compares

Feature BB6 Toyota Celica SS-II Nissan 200SX SE-R
Power (stock) H22A4 195hp (US 5th) 3S-GE 200hp (BEAMS) SR20DE 140-165hp
Torque (stock) 156 lb-ft (H22A4) 159 lb-ft (BEAMS) 160 lb-ft (KL-DE)
Drivetrain layout FWD (SH adds ATTS) RWD RWD
Handling tech ATTS (Type SH) / 4WS (older) Super Strut (some trims) HICAS (some trims)
Transmission 5MT/4AT (most markets) 5MT/4AT 5MT/4AT
Weight (typical) ≈2,900-3,050 lb (5th) ≈2,600-2,750 lb ≈3,050-3,250 lb
Aftermarket depth Strong (H/F-series ecosystem) Very strong (B-series) Strong (SR20 ecosystem)
Collectibility Rising; SH/manual/stock best High; top-tier 90s Honda High; JDM halo coupe
Reliability baseline High if maintained; watch belts High; watch oil leaks Good; turbo heat issues
Ownership costs Moderate; trim parts pricey Higher; turbo/4WD upkeep Higher; RWD sports tax
Cabin practicality 2+2; usable trunk 2+2; hatch utility 2-seater; limited cargo

Comparable Alternatives

Acura Integra GS-R

Lighter, B18C VTEC; huge support; often pricier

Nissan 240SX S14

RWD balance and drift demand; higher chassis premiums

Honda Accord Coupe V6

More comfort; strong V6 torque; less collectible

Hyundai Tiburon GT

Budget modern-ish coupe; easier parts; less character

From JDMBUYSELL

Browse JDM listings from dealers and private sellers worldwide

Browse all listings

Frequently Asked Questions

Which Prelude is most collectible?
Clean, stock 5th-gen manuals lead; Type SH (ATTS) and rare colors/options add premiums.
What are typical Prelude price ranges today?
Driver cars often $6k–$12k; clean manuals $12k–$20k; top SH/low-mile can exceed $25k.
Is the Type SH better than the Base model?
SH feels sharper due to ATTS, but adds complexity. Base is simpler and often cheaper to keep perfect.
What are the biggest mechanical must-check items?
Verify timing belt/water pump, oil leaks, cooling health, and smooth shifts. Inspect suspension bushings and mounts.
Are Prelude automatic transmissions bad?
Some era Honda autos can be weaker if neglected. A serviced manual is safest for longevity and resale.
What rust areas should I inspect?
Check rear quarters, rockers, floor points, and underbody seams. Poor repairs hurt value more than mileage.
What mods hurt value the most?
Cut wiring, cheap turbo kits, loud exhaust, coilovers without alignment, and missing OEM parts. Stock + documented wins.
What makes a top auction-grade Prelude?
Original paint/panels, clean VIN tags, full service records, correct wheels/trim, and a manual with OEM-like drivability.

11 sources cited below

Sources & References

Sources (11)
  1. Honda Prelude Factory Service Manuals (various years) — Wikipedia (encyclopedic overview, used for cross-reference of factory documentation) Verified
  2. Honda Prelude auction results and listing history — Bring a Trailer Verified
  3. Honda Prelude listings and sold results — Cars & Bids Verified
  4. Classic.com aggregated sales data: Honda Prelude — Classic.com Verified
  5. Honda Prelude model page and reviews archive — Car and Driver Verified
  6. Honda Prelude model page — MotorTrend Verified
  7. Honda Prelude valuation tool — Hagerty Verified
  8. Honda H engine — encyclopedic overview (H22A red-top, H22A4 specifications) — Wikipedia Verified
  9. Four-wheel steering — encyclopedic overview and history of the 1987 Prelude system — Wikipedia Verified
  10. Honda Prelude Concept — 2023 Japan Mobility Show coverage — Car and Driver Verified
  11. Honda Prelude original hero image credit (Flickr) — Flickr / tdm911 Verified

Sources last verified:

Market & demand on JDMBUYSELL

Reported sold prices and buyer-inquiry trend for the Honda Prelude BB6 on the JDMBUYSELL marketplace.

Source: /api/market-data/honda/prelude/bb6.json · Sold prices aggregated from listings marked sold by private-party sellers on JDMBUYSELL — seller-reported, not verified hammer prices. Inquiry counts are distinct buyer-to-seller conversations referencing at least one listing for this chassis.

Report a correction

Spotted something wrong on this page? Tell us and we'll review.